Aerometal Coating - only for commercial use
Description:Product Information "Aeromeal Coating - Commercial only"
For all painted exterior surfaces on the car. Operating time min. 18 months / consumption ca.15-17 ml / vehicleApplication: for all, pure & untreated metal surfaces on aircraft (gliders, sport aircraft, etc.).
servFaces - Aero Coatings (product properties)
A technology for numerous surfaces on aircraft. The transparent and high-strength surface coatings of the servFaces series are a versatile and unique quality product. They provide optimum protection for a wide range of applications.
Multitalent for surface optimization
The highly transparent coatings form a long-lasting, scratch-resistant and dirt-resistant protective coating even with minimal application. Due to the low material use, the hard coatings are particularly suitable for large areas of application. Damage caused by resins, acids, salts, weathering and mechanical influences are therefore no chance. Our high-strength silicon hard coatings are also extremely heat-resistant up to 1800 ° C. This does not adversely affect the burning properties of the surface.
Our goal is to make good products that leave a good feeling. We therefore pay attention to the best compatibility for humans and the environment. Our coatings are food-borne after curing.
transparent, invisible, flexible and permanent long-term coating
free of siloxane, fluorine, Teflon, wax, silicone & carcinogenic additives
UV & weather resistant
salt water resistant
Anti-graffiti effect and protection against almost all acids and bases as well as organic solvents
temperature resistant from -50 ° C to +1800 ° C (depending on formulation)
resistant to chemicals
not combustible / corrosive
increases the hardness and scratch resistance, very high abrasion resistance
Aerocoating meets the following requirements at a layer thickness of 3-5 micrometers. (Layer thickness depends on the application process)
1. Hydrophobing of clean, bright, polished or painted surfaces.
(The surface must be free of silicone and grease.) Suitable cleaners are servFaces Cleaner Ultima & Neutra)
2. Optimize the surface hardness of the coated substrate.
3. Due to the unique manufacturing formula (organic / inorganic components) the coating has the property of "self healing". This thermoelastic / thermoplastic flow behavior shows no lacquer system.
4. Due to the high inorganic content, components can also be successfully sealed which are subjected to a continuous load of up to 1050 ° C.
This listing is only a brief description of the services.
Make the surface to be treated clean and free of grease. On smooth surfaces you can apply the product with our applicator. After a short reaction time of about 1-2 minutes, the excess product residues can be removed with a microfiber cloth. Aerosol coating is also optimally applicable in the fine spray process. On rough and absorbent surfaces, the product can be applied by spraying or rolling up. The ambient temperature should be between + 5 ° C - + 35 ° C to achieve the best results. After 120 minutes, the coating is dust-dried.
The product requires approximately 6-8 days for complete curing (depending on temperature and humidity). After curing, the coating is resistant to acids, alkalis and solvents (pH 2-13).
- After treatment, protect the surface at least 18 hours from dirt and moisture.
- Complete drying time at room temperature: approx. 6-8 days.
- a separate drying can reduce the drying time by approx. 2-3 days.
- Processing temperature: +5 ° C - + 35 ° C
-use: smooth surfaces 3-8 ml / m2 - absorbent / open-pore surfaces (1-layer coating) 5-7ml / m²
- During curing, the surface must not be subjected to friction!
Aeropaint coating: 250ml / 500ml / 1000ml
Application: for all external paint surfaces on aircraft (gliders, sport aircraft, etc.). Also suitable for pure plastic surfaces.
Aerometal Coating: 250ml / 500ml / 1000ml
Application: for all pure and untreated metal surfaces on airplanes (gliders, sport aircraft, etc.).
Aerowow Window Coating: 250ml / 500ml / 1000ml
Application: for all pure and untreated glass surfaces on airplanes (gliders, sport aircraft, etc.).
Storage at +5 ° C - +25 ° C / before frost protection
Other fine products
$24.33Product information "Surface Cleaner Ultima"servFaces - surface cleaning before sealing / coating...
$19.11Product information "Surface Cleaner Neutra"servFaces - surface cleaning before sealing / coating...
$562.95Product Information "Aeropaint Coating - commercial only"Application: for all external paint surf...