- 50 ml out of stock
- 100 ml out of stock
- 1000 ml 1 item left
- 5000 ml out of stock
Description:Product information "Tiles Coating"
servFaces - Tiles Coating (product properties)
For numerous, smooth & polished mineral surfaces, e.g. Granite, marble, ceramic surfaces in the sanitary area, various tiles ...
Approx. 24-60 months / consumption 3-10ml / m²
The transparent and high-strength surface coating of the servFaces series is a versatile and unique quality product for numerous mineral surfaces such as Granite, marble, ceramic surfaces in the sanitary area, various tiles u.v.m. It provides optimum protection for a wide range of applications.
Multitalent for surface optimization
The highly transparent coatings form a long-lasting, scratch-resistant and dirt-resistant protective coating even with minimal application. Due to the low material use, the hard coatings are particularly suitable for large areas of application. Damage caused by resins, acids, salts, weathering and mechanical influences are therefore no chance. Our high-strength hard coatings are also extremely heat-resistant from + 890 ° C - + 1800 ° C (depending on formulation).
Our goal is to make good products that leave a good feeling. We therefore pay attention to the best compatibility for humans and the environment. Our coatings are food-borne after curing.
transparent, invisible, flexible and permanent long-term coating.
free of siloxane, fluorine, Teflon, wax, silicone & no carcinogenic additives
UV & weather resistant
salt water resistant
Anti-graffiti effect and protection against almost all acids and bases as well as organic solvents
temperature resistant from -50 ° C to +1800 ° C (depending on formulation)
resistant to chemicals / (pH 2-13)
not combustible / corrosive
increases the hardness and scratch resistance, very high abrasion resistance
Corrosion protection up to 10 years and longer
reduces fingerprints up to 90%
lasting protection against oil, vinegar, orange / lemon juice, lipstick, red wine and v.v.
Prolong the cleaning intervals and reduce the cleaning and maintenance costs
Tiles Coating has the following properties at a layer thickness of 3-5 micrometers. (Layer thickness depends on the application process)
1. Hydrophobing of clean, bright, polished or painted surfaces.
(The surface must be free of silicone and grease.) Suitable cleaners are servFaces Cleaner Ultima & Neutra)
2. Optimize the surface hardness of the coated substrate.
3. Due to the unique manufacturing formula (organic / inorganic components) the coating has the property of "self healing". This thermoelastic / thermoplastic flow behavior shows no lacquer system.
4. Due to the high inorganic content, surfaces can also be successfully sealed, which are exposed to a constant load of up to 1050 ° C.
This listing is only a brief description of the services.
Make the surface to be treated clean and free of grease. On smooth surfaces you can apply the product with our applicator. After a short reaction time of about 1-2 minutes, the excess product residues can be removed with a microfiber cloth. Can also be used optimally in the fine spraying & rewinding process. The ambient temperature should be between + 5 ° C - + 35 ° C for best results. After 120 minutes the product is dust-dried.
The product requires approximately 6-8 days for complete curing (depending on temperature and humidity).
After curing, the coating is resistant to acids, alkalis and solvents (pH 2-13).
- After treatment, protect the surface at least 18 hours from dirt and moisture.
- After 24 hours the sanitary facilities can be reused.
- Complete drying time at room temperature: approx. 6-8 days.
- a separate drying can reduce the drying time by approx. 2-3 days.
- Processing temperature: +5 ° C - + 35 ° C
-use: smooth surfaces 3-8 ml / ml
During curing, the surface must not be subjected to friction.
Container: 50ml / 100ml / 1000ml / 5 liter can
Storage Store at + 5 ° C - +25 ° C / before freezing